Get an account | | Accounts are free. Join #retro on irc.fxnet.org, identify with NickServ and type !req. | | [ how ] |
|
| IRC | #retro on irc.fxnet.org 6697 ssl · 6667 plain modern + vintage clients welcome | | [ vintage how-to ] |
|
| Some stats | | releases | 1,766 | | last 24h | +750 | | online | 404.1 GB | | library | 1.2 TB | | members | 0 | | updated | 2026-10-04 23:30 |
|
|
| | Macintosh PowerBook 1400 Series CD-ROM Drive Replacement |
| Device | Macintosh PowerBook 1400 Series |
| Difficulty | Very easy |
| Time | 1 minute |
| Steps | 6 |
This guide is by Corinne Schnieders on iFixit and is licensed under Creative Commons Attribution-NonCommercial-ShareAlike 3.0. ByteRot mirrors it for non-commercial preservation: formatting changed and photos resized for old browsers; full-size photos and the text are on the FTP in /DOCS/REPAIR. Original guide >>
This repair guide will show you how to replace the CD-ROM Drive. |
|
| Step 1 | ![[step 1 photo]](5399/step01-1.jpg) Turn the device upside down and then locate the battery latch near the front of the device.
|
|
| Step 2 | ![[step 2 photo]](5399/step02-1.jpg) Slide the latch to the left to release the battery.
|
|
| Step 3 | ![[step 3 photo]](5399/step03-1.jpg) Continue holding the latch then gently pull the battery out of the device. NOTE: Place the battery in a safe location.
|
|
| Step 4 | ![[step 4 photo]](5399/step04-1.jpg) Locate the CD-ROM Drive latch.
|
|
| Step 5 | ![[step 5 photo]](5399/step05-1.jpg) Slide the latch to the right to release the CD ROM drive.
|
|
| Step 6 | ![[step 6 photo]](5399/step06-1.jpg) Continue holding the latch then gently pull the CD-ROM Drive out of the device. NOTE: Place the CD ROM drive in a safe location.
|
|
| Conclusion | | To reassemble your device, follow these instructions in reverse order. |
|
|