|  | | Accounts are free. Join #retro on irc.fxnet.org, identify with NickServ and type !req. |
| |
|
|  |  |  |
|  | #retro on irc.fxnet.org 6697 ssl · 6667 plain modern + vintage clients welcome |
| |
|
|  |  |  |
|  | 3 people in #retro okawari, synmuffin, thelounge76 nobody on the FTP last upload: Archived Windows 3.0 - 11 ISO B... by archiveorg, 35d ago |
| as of 21:42 EST · ![[community]](../static/px/pill-27e9b02061a3.gif) |
|
|
|  |  |  |
|  | | releases | 2,186 | | last 24h | +0 | | online | 1.7 TB | | library | 1.4 TB | | members | 1 | | updated | 2026-11-18 21:42 |
|
|
|
|  |  |  |
|  | |  |
| Device | Nintendo 64 Controller |
| Difficulty | Easy |
| Time | 1 - 10 minutes |
| Steps | 4 |
This guide is by Carly Bowen on iFixit and is licensed under Creative Commons Attribution-NonCommercial-ShareAlike 3.0. ByteRot mirrors it for non-commercial preservation: formatting changed and photos resized for old browsers; full-size photos and the text are on the FTP in /DOCS/REPAIR. Original guide >>
Does your Rumble Pak no longer vibrate? Learn how to check for corrosion and replace the batteries in your Rumble Pak to continue enjoying the ultimate gaming experience.
Tools: Cotton Swabs; 6-in-1 Screwdriver
Parts: AAA Battery |
|
|
|  |  |  |
|  | ![[step 1 photo]](44827/step01-1.jpg) Remove the Rumble Pak from the controller by pressing the release button and pulling the Rumble Pak out.
|
|
|
|  |  |  |
|  | ![[step 2 photo]](44827/step02-1.jpg) Remove the battery cover from the Rumble Pak by pressing the tab and pulling the cover up.
|
|
|
|  |  |  |
|  | ![[step 3 photo]](44827/step03-1.jpg) Press each battery toward the spring, then pull toward you to remove the batteries from the Rumble Pak. REMINDER: When inserting the new batteries, make sure the positive (+) end of the battery touches the flat piece, and the negative (-) end touches the spring.
|
|
|
|  |  |  |
|  |
![[step 4 photo]](44827/step04-3.jpg) Check for corrosion around the springs and the flat plate where the batteries touch. CAUTION: Do not touch the corrosion. It may be battery acid. Use a flat head screwdriver to chisel away the corrosion, and use a Q-tip to wipe it clean. CAUTION: Do not use water to wet the Q-tip, as water can damage the Rumble Pak.
|
|
|
|  |  |  |
|  | | To reassemble your device, follow these instructions in reverse order. |
|
|
|  |  |  |
|