ByteRot :: Opening the Chassis

BYTEROT - retro PCs, consoles and lost software

Get an account

Accounts are free. Join #retro on irc.fxnet.org, identify with NickServ and type !req.

[ how ]

IRC

#retro on irc.fxnet.org
6697 ssl · 6667 plain
modern + vintage clients welcome

[ vintage how-to ]

Sections

OS 1,075

DRIVERS 61

SOFTWARE 22

GAMES 10

UTILS 37

DOCS 561

INCOMING 0

REQUESTS 0

LIBRARY 25,406 files

Some stats

releases	1,766
last 24h	+750
online	404.1 GB
library	1.2 TB
members	0
updated	2026-10-04 23:30

Opening the Chassis

Device	Power Macintosh G3 Minitower
Difficulty	Easy
Time	20 - 25 seconds
Steps	3

This guide is by LeoI07 on iFixit and is licensed under Creative Commons Attribution-NonCommercial-ShareAlike 3.0. ByteRot mirrors it for non-commercial preservation: formatting changed and photos resized for old browsers; full-size photos and the text are on the FTP in /DOCS/REPAIR. Original guide >>

Step 1 :: Side Access Panel

• Press the green release button on top of the side access panel.
• Pull off the side access panel to get inside the computer.
• NOTE: When putting the side access panel back on, make sure that the bottom of the panel lines up with the rail on the bottom, and that the chassis is locked with the green latches.

Step 2 :: Opening the Chassis

• Lay the computer on its side, ensuring that where the side access panel was is facing up.

Step 3

• Unlock the top chassis by moving the two green locking latches upward and outward.
• Using the handle, gently swing the top chassis up and out until it rests firmly on the work surface.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Credit