 Get an account | | Accounts are free. Join #retro on irc.fxnet.org, identify with NickServ and type !req. | | [ how ] |
|
| IRC | #retro on irc.fxnet.org
6697 ssl · 6667 plain
modern + vintage clients welcome | | [ vintage how-to ] |
|
| Some stats | | releases | 1,766 | | last 24h | +750 | | online | 404.1 GB | | library | 1.2 TB | | members | 0 | | updated | 2026-10-04 23:30 |
|
|
| |  Power Macintosh G3 (Minitower) Chassis Locking Latch Replacement |
| Device | Power Macintosh G3 Minitower |
| Difficulty | Easy |
| Time | 30 seconds |
| Steps | 2 |
This guide is by LeoI07 on iFixit and is licensed under Creative Commons Attribution-NonCommercial-ShareAlike 3.0. ByteRot mirrors it for non-commercial preservation: formatting changed and photos resized for old browsers; full-size photos and the text are on the FTP in /DOCS/REPAIR. Original guide >>
Tools: Phillips #1 Screwdriver |
|
| Step 1 :: Side Access Panel | • Press the green release button on top of the side access panel.
• Pull off the side access panel to get inside the computer.
• NOTE: When putting the side access panel back on, make sure that the bottom of the panel lines up with the rail on the bottom, and that the chassis is locked with the green latches.
|
|
| Step 2 :: Chassis Locking Latches | • Using a Phillips screwdriver, unscrew the latch screw and remove it, along with the washer.
• Remove the locking latch.
• Repeat this step for the other latch.
|
|
| Conclusion | | To reassemble your device, follow these instructions in reverse order. |
|
|
![[ByteRot]](../static/btn-byterot.gif){kind=small}
![[FTP]](../static/btn-ftp.gif){kind=small}
![[IRC]](../static/btn-irc.gif){kind=small}
![[Any Browser]](../static/btn-anybrowser.gif){kind=small}
![[HTML 3.2]](../static/btn-html32.gif){kind=small}
