BYTEROT - retro PCs, consoles and lost software
homearticleshow-toswhat's newlibraryrepaircommunityconnectcontributelinks
» ftp ftp.byterot.net  ::  irc #retro on irc.fxnet.org (3 here)  ::  2,186 releases  ::  25,577 library files18.11.2026
MAIN MENU::
HOME01
ARTICLES02
HOW-TOS03
WHAT'S NEW04
LIBRARY05
> REPAIR06
COMMUNITY07
CONNECT08
CONTRIBUTE09
LINKS10

GET AN ACCOUNT::
Accounts are free. Join #retro on irc.fxnet.org, identify with NickServ and type !req.
[how]

IRC::
#retro on irc.fxnet.org
6697 ssl · 6667 plain
modern + vintage clients welcome
[vintage how-to]

WHO'S AROUND::
3 people in #retro
okawari, synmuffin, thelounge76
nobody on the FTP
last upload: Archived Windows 3.0 - 11 ISO B... by archiveorg, 35d ago
as of 21:42 EST · [community]

SECTIONS::

OS


1551

DRIVERS


61

SOFTWARE


22

GAMES


10

UTILS


37

DOCS


505

INCOMING


0

REQUESTS


0

LIBRARY


25577

SOME STATS::
releases2,186
last 24h+0
online1.7 TB
library1.4 TB
members1
updated2026-11-18 21:42

HOW TO USE A DESOLDERING PUMP::
DeviceSoldering
DifficultyModerate
Time30 seconds - 2 minutes
Steps4
This guide is by Arthur Shi on iFixit and is licensed under Creative Commons Attribution-NonCommercial-ShareAlike 3.0. ByteRot mirrors it for non-commercial preservation: formatting changed and photos resized for old browsers; full-size photos and the text are on the FTP in /DOCS/REPAIR. Original guide >>

A desoldering pump (or solder sucker) is a handy tool that sucks molten solder. You can use it to desolder through-hole components on a circuit board or to rework bad solder joints.

This guide shows how to use and clean iFixit's desoldering pump. You may need to use some soldering wick to clean up any solder remnants--follow this guide (https://www.ifixit.com/Guide/How+to+Clean+Up+Solder+Pads/20699) on how to use soldering wick.

Tools: Desoldering Pump


STEP 1 :: PRIME THE PUMP::
[step 1 photo] [step 1 photo]
• NOTE: If this is your first time using a desoldering pump (https://www.ifixit.com/en-ca/products/desoldering-pump), try priming and activating the pump a few times before you use it for desoldering purposes.
• Firmly grasp the desoldering pump with your hand.
• Depress the plunger until it locks in place.
    • NOTE: This primes the spring-loaded piston for suction.

STEP 2 :: ACTIVATE THE PUMP::
[step 2 photo] [step 2 photo]
• To activate the pump, press the black side button.
    • NOTE: This releases the spring-loaded piston, which creates a burst of suction at the nozzle.
• CAUTION: The piston release creates a substantial kickback. Brace your hand when you use the pump to keep the nozzle steady.

STEP 3 :: DESOLDER A JOINT::
[step 3 photo] [step 3 photo] [step 3 photo]
• CAUTION: Do not use the desoldering pump to desolder joints near small surface-mounted (SMT) components. The heat spillover and suction may dislodge the SMT components.
• Prime the desoldering pump by depressing the plunger.
• Heat the solder joint until the solder is liquified. To help with heat transfer, add some solder onto the soldering iron's (https://www.ifixit.com/en-ca/products/fixhub-power-series-smart-soldering-iron) tip.
• Position the pump's nozzle as close to the molten solder as possible.
    • NOTE: The nozzle is made of heat-resistant plastic, so don't worry if you occasionally brush the tip with it.
• Press the side button to activate the pump.
• Repeat the process until the joint is clean. You can also use solder wick (https://www.ifixit.com/products/solder-wick-braid) to help soak up any remnant solder.

STEP 4 :: CLEAN THE DESOLDERING PUMP::
[step 4 photo] [step 4 photo] [step 4 photo]
• To clean the pump, prime and activate the pump a few times. This pushes a rod through the nozzle and ensures that solder doesn't block it.
• NOTE: On the rare occasion when the pump needs a more thorough cleaning, you can disassemble the pump to clean it out:
    • Grasp the nozzle by its knurled edge.
    • Twist the nozzle counter-clockwise to unscrew it. This may be difficult due to a tight-fitting O-ring.
    • Remove the nozzle and clean out the pump interior.

CONCLUSION::
For soldering instructions and tips, follow this guide (https://www.ifixit.com/Guide/How+To+Solder+and+Desolder+Connections/750).

CREDIT::
This guide is by Arthur Shi on iFixit and is licensed under Creative Commons Attribution-NonCommercial-ShareAlike 3.0. ByteRot mirrors it for non-commercial preservation: formatting changed and photos resized for old browsers; full-size photos and the text are on the FTP in /DOCS/REPAIR. Original guide >>
[all repair guides]

[ BYTEROT / OLD BITS FOR OLD MACHINES ]

[ByteRot] [FTP] [IRC] [Any Browser] [HTML 3.2]
© 2026 ByteRot · plain HTML 3.2, no JavaScript: works in Mosaic, Netscape, IE, Lynx and whatever you're using now · best viewed at 800x600 · built 2026-11-18